Internet Tools (InfoMagic)/Internet Tools.iso/dos_win/winsock/maillist/94-05.Z/94-05/[e-mail]_Tue May 27 21:52:50 1994.msg

Internet Message Format | 1994-05-31 | 4KB

Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
          id AA08181; Fri, 27 May 1994 19:25:53 -0400
Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
          id AA26634; Fri, 27 May 1994 19:00:07 -0400
Received: from GATEWAY by bigblue with netnews
    for [e-mail] ([e-mail])
To: [e-mail]
Date: 27 May 1994 21:52:50 GMT
From: [e-mail]
Message-Id: <2s5q3i$[e-mail]>
Organization: Division of Information Technology
Sender: ses
Reply-To: [e-mail]
Subject: WinVN won't post articles

When I attempt to post an article using WinVN, it fails every time and pops up an error
window containing "480  Authentication Required for Command".  Is this caused by an
invalid entry in my WinVN.ini file?  I have double checked the addresses for the gateway
etc. and they are all correct.  Can someone point me in the right direction?  Thanks.

Jeff Huston
[e-mail]
From [e-mail] Tue May 27 22:50:11 1994
Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
          id AA08194; Fri, 27 May 1994 19:25:54 -0400
Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
          id AA29241; Fri, 27 May 1994 19:02:57 -0400
Received: from GATEWAY by bigblue with netnews
    for [e-mail] ([e-mail])
To: [e-mail]
Date: 27 May 1994 22:50:11 GMT
From: [e-mail] (Stephanus Sonny Leman)
Message-Id: <2s5tf3$[e-mail]>
Organization: Dept. of Computer Science, Michigan State University
Sender: ses
References: <[e-mail]>, <[e-mail]>
Subject: Re: Trumpet Winsock and WFWG

Gil Salazar ([e-mail]) wrote:

: >I have just installed Trumpet Winsock on WFWG 3.11.  When starting up TCPMAN,
: >I get the message "Unable to load TCP"  I have tried various things like
I get the same kind of problem, i did the following
  ppp /d script /c 3 /i 4 /s 19200
then my pc get 'connected' to the remote host
  winpkt 0x60
  win
  (run the ) tcpman
  set the IP address
  rerun the tcpman

then i get the same message: Unable to load TCP.

: Did you remember to put Trumpet in your path and also to run winpkt before
I did
: your run Windows. And one more thing, do you have the dis_pkt.dos loaded
: in your system.ini file.  These are all necessary to run Trumpet with WFWG.
how to load dis_pkt.dos in my system.ini file ?

Does this kind of problem only appear in the WFWG3.11
and not in the Windows3.1 ?

Another question: how to use internal slip in the tcpman ?
Do we need another programs ?

thanks,

-sonny
From [e-mail] Fri May 27 23:20:42 1994
Received: from bigblue.oit.unc.edu by SunSITE.Unc.EDU (5.65c+IDA/FvK-1.07) with SMTP
          id AA13713; Fri, 27 May 1994 19:55:53 -0400
Received: by bigblue.oit.unc.edu (AIX 3.2/UCB 5.64/4.03)
          id AA17330; Fri, 27 May 1994 19:26:33 -0400
Received: from GATEWAY by bigblue with netnews
    for [e-mail] ([e-mail])
To: [e-mail]
Date: Fri, 27 May 1994 23:20:42 +0000
From: [e-mail] (Steve Holt)
Message-Id: <[e-mail]>
Sender: ses
References: <[e-mail]>
Reply-To: [e-mail]
Subject: Re: Off line newsreader?

In article: <[e-mail]>  [e-mail]
writes:
>
>
> I know it's been asked before, but does anyone know of a News
> Reader which will automatically save all articles to disk, so
> that they can be read off line?
>
> I have a slow link, so this would be very helpful. Surely it
> wouldn't be too hard to write?
>
> TIA
>
> David
>
If you are using Windows on an IBM PC, _DICS_ can be used to download
news items, then _Newswin_ can be used to read them off-line. Both of
these can be obtained from ftp.demon.co.uk /pub/ibmpc/winsock along with
the necessary winsock files.

   +---------------------------------------------------------------+
   | Steve Holt                  | Email : [e-mail] |
   | Northants, England.         | Voice & Fax : [phone]     |
   +---------------------------------------------------------------+